# changelog

author: Dries Verachtert <dries@ulyssis.org> - 5.44-1
changelog:
  - Updated to release 5.44.
  - ...
  - Changelog trimmed, see http://svn.rpmforge.net/svn/trunk/rpms/perl-Digest-SHA/perl-Digest-SHA.spec


author: Greg J. Zartman <greg@leiinc.com> 0.1.0-1
changelog:
  - Roll initial package.
  - Provide configuration parameters to deploy Samba winbindd deamon.
  - Add template to nsswitch.conf to configure nss to include winbindd auth.
    The configuration parameters included in this fragment really belong
    in e-smith-base, but we are including it in this package until it is 
    deemed appropriate to move it to e-smith-base.


author: Greg J. Zartman <greg@leiinc.com> 0.1.0-2
changelog:
  - Add template fragments to etc/pam.d/login to look for winbindd auth is
    winbindd is running [SME: 4196].
  - Add a template fragment to ibays to set the samba 'force group'
    parameter to the current ibay group or the group shared when SME is
    configured as a Domain Member of Active Directory Member.  The is required
    so that domain members can have write access to domain member shares.  At
    some point, we may decide to fully support domain groups transparently
    at the domain member or active directory member server [SME: 4196].


author: Greg J. Zartman <greg@leiinc.com> 0.1.0-3
changelog:
  - Set winbindd to disabled by default and on initial install, was 
    previouslly enabled by default.
  - Create action to start winbindd if the DM or ADM server roles are designated.


author: Greg J. Zartman <greg@leiinc.com> 0.1.0-4
changelog:
  - Update winbindd-service-status action to set service to disabled if 
    service is enabled and ServerRole is changed.


author: Marco Hess <marco.hess@through-ip.com> 1.1.0-0
changelog:
  - Package rebuild for SME9
  - Updated to latest CSS for gitweb-theme.
  - Updated icons to latest git types.
  - Removed own gitweb.js


author: Dries Verachtert <dries@ulyssis.org> - 1.04-1.2
changelog:
  - Rebuild for Fedora Core 5.
  - ...
  - Changelog trimmed, see http://svn.rpmforge.net/svn/trunk/rpms/perl-IO-Zlib/perl-IO-Zlib.spec


author: Daniel Berteaud <daniel@firewall-services.com> 0.84-8.sme
changelog:
  - Fix handling of messages with no body and no trailing \n after headers (eq was
    used in attempted assignment). [SME: 8051, see SME: 7754]


author: stephane de Labrusse <stephdl@de-labrusse.fr> 0.84-11.sme
changelog:
  - Modify whitelist_soft transaction to interact with dnsbl filter [SME: 8747]
  - by John Crisp <jcrisp@safeandsoundit.co.uk>


author: Daniel Berteaud <daniel@firewall-services.com> 0.84-12.sme
changelog:
  - Revert forcing TLSv1 patch as it breaks some inbound delivery [SME: 8851]
  - Revert whitelist_soft dnsbl as it hasn't been verified yet and we need to
    push the fix for TLSv1 [SME: 8747]


author: stephane de Labrusse <stephdl@de-labrusse.fr> 0.84-15.sme
changelog:
  - Modify whitelist_soft transaction to interact with dnsbl filter [SME: 8747]
  - by John Crisp <jcrisp@safeandsoundit.co.uk>
  - Added qpsmtpd-0.84-make-dnsbl-more-whitelist_soft-aware.patch


author: <filippo.carletti@gmail.com> 0.83-0.7.sme
changelog:
  - Remove spool and log dir from package (in smeserver-qpsmtpd)
  - Don't create smtpd user (unused in sme) [SME: 5815]


author: <slords@mail.com> 0.84-0.1.sme
changelog:
  - Update to 0.84
  - add sme specific patches
  - Perl module rpms moved to /usr/share/perl5/vendor_perl [SME: 7223]


author: <slords@mail.com> 0.84-2.sme
changelog:
  - Sync with upstream git repo.
  - Fix require_resolvable_fromhost doesn't work [SME: 6369]
  - Fix TLS security defaults [SME: 6241]
  - Fix fatal errors when mail has no headers [SME: 6345]


author: Aurelien Bompard <abompard@fedoraproject.org> 1.24-4
changelog:
  - add patch to fix bug 247345
  - update URL
  - fix initscript (bug 247083)
  - unmark init script as %config (Fedora policy)


author: Aurelien Bompard <abompard@fedoraproject.org> 1.24-5
changelog:
  - Fix the deprecated way of getting the DSO initializers run, causing
    builds to fails with rpm-build > 4.4.2.1-3 (new find-debuginfo.sh script)


author: Dietmar Berteld <dietmar@berteld.com>
changelog:
  - [1.4-10] Fixing little bugs and better languages support
  	  - Fixed Apache not restarting correctly when uninstalling
  	  - Fixed security on Header.inc.php


author: Sylvain Gomez <sylvaingomez@free.fr>
changelog:
  - [1.4.002-1] Improving upgradability&RPM structure
               BETA VERSION
               - RPM renamed to smeserver-egroupware-1.4.002
               - Fixed RPM structure
               - Fixed iCal bug installing old version 1.4.001
               - Improved Sitemgr (create link instead of moving the folder - new installations only!)
               - MySQL database rebuilt from scratch
               - Updating the RPM is now possible
               - Security improved on header.inc.php (new installations only!)
               - Some useless items are now deleted
               - phpSysInfo default configuration review (config.php+SME styled icon)


author: Sylvain Gomez <sylvaingomez@free.fr>
changelog:
  - [1.4.002-2] Improving upgradability&MySQL DataBase
               MySQL DataBase rebuilt in utf-8 (new installations only!)
               - Fixed Spanish lang in login page (new installations only!)
               - Fixed MySQL rights after when updating from older version
               - Fixed files not upgrading from v1.4.001 to v1.4.002
               - Security is now reset when updating
               - phpSysInfo security improved in Apache template
               - Generating shorter passwords (new installations only!)
               - Description text updated
               - More comments at the install stage


author: Sylvain Gomez <sylvaingomez@free.fr>
changelog:
  - [1.4.002-3] Improving SME integration
              MySQL init templates added
              - Events added for DomainName changes
              - MySQL importation method changed
              - Security is now improved on header.inc.php after an update
              - Gallery2 added (but not installed by default)
              - Type changed from service to url
              - Fudforum obsolete lines commented in Apache template


author: Sylvain Gomez <sylvaingomez@free.fr>
changelog:
  - [1.4.004-1] Update to new version 1.4.004
              Update eGroupWare and Gallery to latest available versions
              - Apache template modified for FCKeditor (thanks to 'atariblau')
              - Default database updated


author: JP Pialasse <tests@pialasse.com> 1.8.005-3.sme
changelog:
  - upgrade to eGroupware 1.8 using opensuse rpm for Centos5
  - built for eGroupware-1.8.005.20131007
  - see [SME: 8040]
  - 2 revert back some configuration in spec
  - will need to move to an event 
  - 3 fix tmp and sess directory 
  - fix default g2data path


author: Nalin Dahyabhai <nalin@redhat.com> 3.19-1
changelog:
  - update to 3.19 to avoid problems with stunnel being multithreaded, but
    tcp wrappers not being thrad-safe


author: Nalin Dahyabhai <nalin@redhat.com> 3.20-1
changelog:
  - log using LOG_AUTHPRIV facility by default (#47289)
  - make permissions on stunnel binary 0755
  - implicitly trust certificates in %{_datadir}/ssl/trusted (#24034)


author: Gordon Rowell <gordonr@gormand.com.au> 3.22-3gr01
changelog:
  - Mini RPM with just stunnel-tls and makesock
  - Grr - why are RPM macros sooo broken - (percent)makeinstall
    is still executed even if # commented out in the (percent)install
    section


author: Lukáš Nykrýn - 9.03.43-1
changelog:
  - ifup-aliases: arpcheck - check for parent operstate and carrier
  - ifdown: don't wait for aliases
  - hotplug: don't call ifup when new vlan appears
  - ifup-wireless: add support for wowlan (second part)
  - readonly-root: remount rpc_pipefs if readonly-root is used


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.03.47-1
changelog:
  - rc.sysinit: be more verbose
  - init.d/functions: rc.debug option to debug initscripts
  - ifup-aliases: inherit ARPCHECK from parent device
  - netfs: don't race NFS umount to network shutdown
  - network: report that we can't shut down network for root on netfs
  - Fix tcsh + grep-2.7. (#636552)
  - sysctl.conf: move bridge setting to module-init-tools
  - rc.sysinit: set affinity also for current shell
  - ifdown-eth: use scope host for lo
  - improve_check_for_bond_master_in_install_bonding_driver
  - network-functions: fix check in install_bonding_driver
  - ifdown-post: remove resolv.conf only in specific cases
  - netconsole: lets run earlier
  - ipcalc: support RFC3021 (#997271)
  - halt: add delay after upsdrvctl shutdown
  - ifup: also set multicast_snooping after the bridge is up


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-132
changelog:
  - Resolves: #767608 - Fix memory leak when accessing non-matched named
    capturing groups
  - Resolves: #839788 - Do not crash if declared DESTROY method has not been
    defined


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-133
changelog:
  - Resolves: #698552 - Correct taintedness tests
  - Resolves: #825713 - Fix find2perl to translate ? glob properly
  - Resolves: #810469 - Upgrade IO-Compress, Compress-Raw-Bzip2, and
    Compress-Raw-Zlib to 2.021
  - Resolves: #819042 - Set default output for Pod::Man and Pod::Text
    parse_file() methods
  - Resolves: #905482 - Require glibc-devel, gdbm-devel, db4-devel by perl-devel


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-134
changelog:
  - Resolves: #973022 - Make non-option handler for Getopt::Long::GetOptions()
    compatible with XML::Simple


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-138
changelog:
  - Fix backslash interpolation in Locale::Maketext (bug #1025906)
  - Do not ignore single-letter-named packages by Module::Plugable (bug #1086215)
  - Run-require exact version of perl-libs by perl-suidperl (bug #1161170)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.03.39-1
changelog:
  - remount /proc to set attributes from fstab #984003
  - print something when arping is detecting colliding ip addresses
  - try dhcpv6 after v4 failed
  - Allow dhclient configuration files for DHCPv6 as well. (#815676)
  - ifdown: don't call nmcli on interface that is alread down
  - call flush addresses with scope global
  - init: inform users about .override files in .conf files
  - netfs: do not force NFS exports to be mounted before _netdev mounts
  - set net.ipv6.conf..autoconf in ifup-ipv6
  - mention rule6 files
  - securetty: check if the device is in the file before attempting to write to it
  - Process rule6-* for sit devices (#840009)
  - Killproc -d should parse same values as sleep
  - Make killproc more granular when delay is passed. (#428029, <xjakub@fi.muni.cz>)
  - bonding: set master up before slaves
  - Fix greps to correctly handle comments and quotation (#915659)


author: Lukas Nykryn <lnykryn@redhat.com> - 9.03.40-1
changelog:
  - sync disks before halt (#1006294)
  - provide KVM guest count and limit info message (#1014731)
  - add ability to disable LVM activation on boot (#1015065)


author: Ian Wells <esmith@wellsi.com> - 9.03.40-2.2.sme
changelog:
  - Add -n 1 to the dmesg line in rc.sysinit to prevent unwanted 
    messages appearing on the console [SME: 8277]


author: Ian Wells <esmith@wellsi.com> - 0.98.4-2.sme
changelog:
  - Add BuildRequires for openssl-devel and libxml2-devel [SME: 8457]
  - Remove Packager and Vendor from spec file.


author: Michel Van hees <michel@vanhees.cc>
changelog:
  - Update contrib to 0.8.7a version
  - Adding access limitation
  - Adding automatic redirection to https
  - Automatic Update process from 0.8.6j


author: Jean-Philippe Pialasse <tests@pialasse.com> 0.8.8b-7.sme
changelog:
  - fix missing type
  - fix wrong path in Virtualhost template
  - fix DB not creating
  - fix extra file in template
  - updated db mysql default


author: Jean-Philippe Pialasse <tests@pialasse.com> 0.8.8b-12.sme
changelog:
  - fixed poller not running in cron , added to crontab
  - fixed wrong ownership for db.php, now cacti:www
  - added status enabled by default
  - user cacti to run in cron


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-130
changelog:
  - Resolves: #915693 - CVE-2012-5526 (newline injection due to improper CRLF
    escaping in Set-Cookie and P3P headers)
  - Resolves: #915693 - CVE-2012-6329 (possible arbitrary code execution via
    Locale::Maketext)
  - Resolves: #915693 - CVE-2013-1667 (DoS in rehashing code)


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-3
changelog:
  - Ensure git database is present in /home/e-smith/db
  - Create default config database entries for 'git'
  - Moved retrieving maxNameLength for panel validations from config 'git'
  - In the user and group list boxes, added support to the special group admin
    and shared to allow either the admin or everybody to be included in the access lists.
  - Updated the HTTP config db error messages to be more clear as to which property needs
    to be configured.


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-31
changelog:
  - Changed the repository-delete script to ensure the SME Git database 
    permissions are Ok for use by GitWeb after a delete.
  - Ensure that on 64-bit systems we use /usr/lib64/httpd/modules/pwauth


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-32
changelog:
  - Fixed a problem in the repository delete script where File::Path is needed
    to reference rmtree.
  - Also cleanup the entry from the database so that repositories of the same 
    name can be created again.


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-34
changelog:
  - git version 1.8 has shifted the location of some executables. Modified the scripts
    to test on these locations so we generate the right paths.


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-37
changelog:
  - Fixed the HTTPS redirection loop. HTTPS redirection is now only done on the HTTP part of of
    the web server configuration and the full Git configuration part is only done in the HTTPS
    section.


author: Marco Hess <marco.hess@through-ip.com> 1.1.0-0
changelog:
  - Require >= SME9. 
  - Moved /usr/lib/perl5/site_perl to /usr/share/perl5/vendor_perl.
  - Fixed pwauth setup.
  - Added AuthBasicProvider external in authentication setup.
  - Fixed GitWebRoot variable scope.
  - Allow adjustment of gitweb static path for git 1.7 vs. git 1.8


author: JP PIALASSE tests@pialasse.com 1.0-2.sme
changelog:
  - manager interface display fix [SME 6989]
  - blkid cache removed for manager listing [SME 6990]
  - Apply local 2012-06-26


author: Gordon Rowell <gordonr@gormand.com.au> 1.1.2-05
changelog:
  - The newer Mail::Ezmlm breaks when passing the -5 parameter to
    set the owner. Do it as a separate step after list creation.
  - Fix up to API update
  - TODO: Need to expand goodrcptto in list create/delete


author: Gordon Rowell <gordonr@gormand.com.au> 1.1.2-07
changelog:
  - Fix up event links, expand goodrcptto
  - TODO: Fix up list deletion
  - TODO: Store lists in accounts db as FQDN and migrate old ones


author: Gordon Rowell <gordonr@gormand.com.au> 1.1.2-08
changelog:
  - Fix up panel so link to ezmlm-web works
  - Add httpd.conf template for ezmlm-web
  - Reserve ezmlm-web url


author: Gordon Rowell <gordonr@gormand.com.au> 1.1.2-10
changelog:
  - Bump e-smith-release requirement to 7.0 since we are now using the
    templates2expand and services2adjust


author: Robert Scheck <robert@fedoraproject.org> - 0.98-1
changelog:
  - Upgrade to 0.98 and updated main.cvd and daily.cvd (#1010168)
  - Fixed discrepancies between clamd initscript and clamd config
    file (#960923, thanks to John Horne)
  - Added build requirement to ncurses-devel for clamdtop (again)
  - Moved clamd wrapper script and documentation into correct sub-
    package (#782596, thanks to Philip Prindeville)


author: Robert Scheck <robert@fedoraproject.org> - 0.98-2
changelog:
  - Really fix all discrepancies between clamd initscript and clamd
    config file (#960923, thanks to John Horne)
  - Ensure that a clamd and clamav-milter condrestart via initscript
    works (#1018312, thanks to Filippo Carletti)


author: Paul Wouters <pwouters@redhat.com> - 0.98.3-1
changelog:
  - Upgrade to 0.98.3
  - Fix --with-libcurl parameter to avoid automatic path detection breakage
  - openssl-devel is now required for hashing code.
  - Added clamsubmit to main package
  - Re-enabled --with-llvm as this speeds up deployment a lot.
  - Fixed older changelog dates


author: Robert Scheck <robert@fedoraproject.org> - 0.98.4-1
changelog:
  - Upgrade to 0.98.4 and updated daily.cvd (#1111811)
  - Add build requirement to libxml2 for DMG, OpenIOC and XAR


author: Dag Wieers <dag@wieers.com> - 3.4-1
changelog:
  - Updated to release 3.4.
  - ...
  - Changelog trimmed, see http://svn.rpmforge.net/svn/trunk/rpms/fping/fping.spec


author: Jiri Skala <jskala@redhat.com> - 2.4.5-18
changelog:
  - fixes #682381 - hardcodes eth0
  - fixes #708260 - SELinux is preventing access on the file LCK..ttyUSB3


author: Marco Hess <marco.hess@through-ip.com> 1.0.0-3
changelog:
  - Setup default config parameters for gitweb as a service
  - Removed HTTP template as this is shared with smeserver-git
  - Added require on gitweb rpm


author: Marco Hess <marco.hess@through-ip.com> 1.1.0-0
changelog:
  - Split spec package to version 1.1 for SME9
  - Fixed user authorisation for repositories viewable from internet


author: Charlie Brady <charlieb@e-smith.com> 2.2.8-1sme02
changelog:
  - Change group of executable from admin to www, so that both apache
    instances can authenticate. Add 102 to SERVER_UIDS to cover both
    newly installed and upgraded systems.


author: Charlie Brady <charlieb@e-smith.com> 2.2.8-1sme03
changelog:
  - Remove redundant SERVER_UID checking - that is taken care of by
    file system permissions. [SME: 1037]


author: Charlie Brady <charlieb@e-smith.com> 2.2.8-4
changelog:
  - Conditionally use "include" in pam configuration, rather than pam_stack.
    Also mark pam config as a config file. [SME: 2551]


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.32-0
changelog:
  - updated to 0.32
  - fixed stackgap/auxvec patch
  - added patches to fix SMP builds and to prevent object file stripping
  - moved %changelog entries from 2005 and before into ChangeLog.2005 file


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.33-0.1502.20101223
changelog:
  - replaced all the single patches with a big one from
    https://github.com/ensc/dietlibc/commits/rebase
  - various ARM-EABI fixes (667852)


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.33-0.1600.20110311
changelog:
  - updated to 20110311 CVS snapshot
  - set fixed page size for arm
  - disabled linux 2.2/2.4 compatibility code + valgrind nice mode
  - reduced stack size for testsuite
  - rediffed patches


author: John H. Bennett III <bennettj@johnbennettservices.com> 2.2-9
changelog:
  - Added migrate fragment to remove FreeBusy db entry from accounts since this
    information is now saved directly to LDAP on SME8.


author: John H. Bennett III <bennettj@johnbennettservices.com> 2.2-11
changelog:
  - Remove changes for -8, -9, -10 so that rpm can be installed on SME 7.x.
    Will re-add appropriate patches for SME8 when it is released.  [SME: 6080]


author: John H. Bennett III <bennettj@johnbennettservices.com> 2.2-13
changelog:
  - Re-Added migrate fragment to remove FreeBusy db entry from accounts since this
    information is now saved directly to LDAP on SME8.


author: John H. Bennett III <bennettj@johnbennettservices.com> 1.0-1
changelog:
  - Initial build
  - Added the ability to enable or disable jeta menu icon from showing up on the
    main webmail screen.  To enable config set jeta service MenuArray disabled|enabled


author: John H. Bennett III <bennettj@johnbennettservices.com> 1.0-2
changelog:
  - Patch to move jeta specific horde registry.php from templates-custom to templates.
  - Changed imp-h3 requires to require imp 4.2 or better so the template move doesn't
    break any previous versions.


